Page 5 - EMO Hannover 2019 Taiwan Exhibitor News of Commercial Times

FORMING STAGE 5
MONDAY,SEPTEMBER ��,����
FORWELL builds a smart mold management system

demonstration plant to create new milestones

-By Chen Renyi
ccIndustrial Germany was developed in decline in exports of Taiwan's machine tools problems being solved were greatly increased.
the 18th and 19th centuries and has always in the first half of 2019. Other parts of the In this way, the purchasing power of the
had an important leading position in the mechanical decline are as high as 20~30%. At market can be effectively improved, and then
world. By participating in the EMO present, the order status is not satisfactory, and the development of the economy should be
International Exhibition in Hannover, Germany, the number of Japanese machine tools has restored.
the Taiwanese machinery industry can not also dropped significantly. It is estimated that ccWen-lung Hsiao said that FORWELL is
only improve international visibility and it will be optimistic if it can be flat in the a cross-strait leading manufacturer of intelligent
obtain orders from various countries, but also second half of the year. Even if the Sino-US equipment for rapid change of mold system.
observe German manufacturing technology trade war is temporarily suspended, there are Due to the poor economic situation, FORWELL
and precision, durability, and the added value still many uncertainties. has not achieved the expected target even
and international competitiveness of ccIn fact, both China and the United States since 2018, but in addition to internal
mechanical development. At the same time, are major export markets for most industries consolidation and rectification. In addition to
due to the impact of Sino-US trade conflicts, in Taiwan, and can be said to be an important research and development of new products,
the economic and industrial development of lifeline for maintaining Taiwanese enterprises. we continue to build a demonstration plant for
Taiwan's largest exporter of machinery in Sino-US trade conflicts will cause many the "Smart Tool Management System",
China was directly affected, and Taiwan's Taiwanese industries to become victims of which has been actively developed in recent
machinery industry was also affected. trade scams. This also causes the demand and years, in the Huaian’s plant in the mainland.
Therefore, if some markets are transferred to development of the smart machinery market By then, the demonstration plant will be able
Europe and Southeast Asia, the market can be to be far less than expected, and to face the to integrate automotive parts and components
safely avoided. rigorous challenges of actively investing in with rubber and metal parts. Demonstration
ccThe president of FORWELL and also the development of smart machinery. production of sample proofing will provide a
the chairman of the TAMI metal forming ccAccording to Wen-lung Hsiao, the trend more complete demonstration of the smart
committee, Wen-lung Hsiao pointed out that of international economic development may molding line. Wen-lung Hsiao, president of the "FORWELL" group. Figure / Chen Renyi
although the Sino-US trade conflict has no be as clear as possible after the end of the 2020 ccThe "Smart Tool Management System" "Mold Automatic Storage System" and can access, storage and maintenance of
direct impact on Taiwan's exports, it has US presidential election. Mainly because of the "Industry 4.0" concept covers a be used in molds. "Mold maintenance molds for injection molding and metal
affected the global economic development. even if Trump succeeded in re-election, under total of three systems, including the system" for maintenance work before forming. In this way, we will establish a
Most industries in the world are conservative the pressure of re-election without paying mass-produced "Mold Transfer System" automatic deposit. The system can effectively fast, safe, easy, and systematic consistent
and have less investment, resulting in a 6% political views, the chances of Sino-US trade (Automatic Die Change Cart System), assist the automatic replacement, transportation, "smart" mold management system.

KCM's bar steel upgrading and precision cutting of long rods. The company has successfully ccIn addition, the company has set up a branch in Taicang, Jiangsu, China, to
provide faster, higher quality professional services to the Chinese market.
high-speed precision marketed its series of models to its international markets in Europe, America, WEBjwww.kcm-samson.com.twf
China, Japan and Brazil under its own brand “KCM”.
cutting machine has a fast ccChen Huihuang, general manager of KCM, said that the machine adopts
mechanical transmission design, and its transmission gears are precision ground,
cutting speed and high which has the characteristics of fast cutting speed and low noise. In addition, this

roundness is a good helper model is equipped with a servo system "high speed sizing" feeding system design,
which can cut 100 steel bars at high speed every minute. The end face is flat and
for valvetrain production. the roundness is high. In particular, the quality, performance, precision, etc. can
exceed the same model of the Japanese manufacturer, but the price is more
-By Chen Renyi economical than the Japanese machine.

ccFor more than 30 years, KUEI CHUAN CO., LTD., which specializes in the ccRecently, the company has innovated and developed a heated "bar steel
research and development of various types of metal cutting machines, has heating high-speed precision cutting machine" (RF-450IH). This model can be
pioneered the development of a high-speed precision cutting machine for the used to cut the steel bar to the optimum processing temperature required for
design of mechanical transmission structures. It has a fast cutting speed and low 300~400 °C through the specially designed heating system. Thereby, the structure
noise. smooth. This model is specially equipped with a servo "high-speed fixed" of the steel bar is prevented from being damaged by the structure caused by the
feeding system. The longest workpiece cutting length can reach 300mm or cutting, and the high safety quality requirements of the workpiece are ensured. And
customized design, which can be fully applied to the precision cutting of steam it is also equipped with a "servo transmission high-speed sizing" feeding system, KCM "bar steel high-speed precision cutting machine" (RF-1000I) is a good
helper for the precision cutting of the valve train of cars and locomotives. Figure
turbine doors. Such tools are the best tool for the industry to pursue industrial which can be said to be a new tool for producing valvetrain for cars and locomotives. / KCM

KSY's "Multi-station Smart Turntable Hydraulic Press" is highly productive, high quality and safe

-By Chen Renyi

ccThe King Shang Yuan Machinery of multiple workpieces, which stability. In this way, the defective series of presses are introduced and reduce the difference in system WEBSitejwww.ksy-machine.com
CO., LTD (KSY), which specializes in is ffaster than straight-line products caused by artificial factors into the German "SICK" "PSDI operation cycle time, thereby
the development of the "Unmanned handling. It has automatic feeding are reduced, the production Presence-Sensing Device Initiation increasing production efficiency by
Automated Production" hydraulic press, and automatic take-out design, and efficiency is higher, and the return which is Safety Assurance 15~35% and greatly improving
has developed the "Multi-station can be equipped with feeders and on investment is high, which is System”to ensure safe operation Ergonomics of operator operations.
Smart Turntable Hydraulic Press" robotic arm to take in or take out suitable for the machining of parts
with"Multi-station" innovation. The functions according to the operation and assembly of fasteners in various
punching machine can simultaneously requirements, which can save mechanical industries.
perform assembly and multi-clamping manpower and improve quality ccKSY pointed out that the
production process of the
"Multi-station" hydraulic press was
completed outside the scope of the
press operation, then rotated into the
press production, and then rotated to
the reclamation area outside the
press range. In this way, when the
feeding and taking out are performed
manually, the operator's hands are
not placed in the mold area to keep it
safe, and the automatic feeding and
taking out functions can be designed
to save manpower and increase the
number of automated working
hours, thus improve the purpose of
production efficiency. In particular,
the model combines the advantages
of press and punch, with features
such as fast speed, accurate bottom
dead center, two-stroke and delayed
pressurization time. The processing
quality is better and more stable, and
it can also be used as a general press.
ccIn addition to the above, the
"KSY" Hydraulic Press for lock nuts notches and assembly. Figure / industry